Phasor-RTDMS is built on the GRID-3P platform.
   
 

Phasor-RTDMSTM - Architecture


 


Display Tier 1: Summary Dashboard Display (Default)
– Simplistic “traffic light” type visuals and gauges are used provide information on using a set of predefined metrics that characterize the overall system status. This tier is described in more detail in section 4.1. This display is centrally configured and shall be common to all WI operators and reliability coordinators.

Display Tier 2: Western Interconnection Displays – A set of five geo-graphic displays showing information on frequency, voltage and flows at key points and lines across the Interconnection, as well as angle differences across PMUs spanning different reliability coordinator regions. These set of displays will be centrally configured and shall be common to all WI operators and reliability coordinators. Responsible group will approve and configure these set of displays.

Display Tier 3: Reliability Coordinator Displays – For each Reliability Coordinator region, a set of five geo-graphic displays showing information on frequency, voltage and flows at all monitored points and lines within the Reliability Coordinator region, as well as angle differences across PMUs within the reliability coordinator region. This set of displays will be centrally configured and shall be common to all WI operators and reliability coordinators. Responsible group will approve and configure these set of displays.

Display Tier 4: Local Displays – A set of five geo-graphic displays showing frequency, voltage, flows, and angle differences for user selected PMUs and paths. Using the configuration utility, the end users will be able to customize this set of displays to their own utility needs.
 
 

 

    © Electric Power Group. All rights reserved

  Terms of Use   Contact Us